panasonic 3do fz-1 power but no video output :( FIXED!! :D
panasonic 3do fz-1 power but no video output :( FIXED!! :D
Hi everyone
ive been given a fz-1 which powers up and ejects cd tray etc but i can't get any video output.
i've tried multiple cables on all sockets (s-video,rca and rf) with no avail
the board is very very clean so but im thinking a cap or two have failed (although they all look in very good condition)ive got the 6800 uf one and will replace it today.
i've only found two references to it through google, one of which is a post on this forum...
http://www.3do.cdinteractive.co.uk/view ... f=2&t=3032 which ive replied to and am no further on so i thought id start a new thread.
Has anyone had this problem? any feedback would be greatly appreciated!
ill edit later on when i've replaced the 6800 uf and the bios battery (not sure if a 3do will boot without the 3v battery).
thanks in advance
mike
UPDATE
after replacing the 6800uf cap i got video (the 3do logo) for about 10 seconds... yay! then it went again
on closer inspection it seems the 10uf 16v @ c36 seems like it might of leaked so gonna replace that now will update again asap
UPDATE 2
FIXED!!
rca is working ive got fz-1's spinning at me in space wohoooo
now im gonna have to test cd drive and get myself a controller lol
hope this helps someone!
ive been given a fz-1 which powers up and ejects cd tray etc but i can't get any video output.
i've tried multiple cables on all sockets (s-video,rca and rf) with no avail
the board is very very clean so but im thinking a cap or two have failed (although they all look in very good condition)ive got the 6800 uf one and will replace it today.
i've only found two references to it through google, one of which is a post on this forum...
http://www.3do.cdinteractive.co.uk/view ... f=2&t=3032 which ive replied to and am no further on so i thought id start a new thread.
Has anyone had this problem? any feedback would be greatly appreciated!
ill edit later on when i've replaced the 6800 uf and the bios battery (not sure if a 3do will boot without the 3v battery).
thanks in advance
mike
UPDATE
after replacing the 6800uf cap i got video (the 3do logo) for about 10 seconds... yay! then it went again
on closer inspection it seems the 10uf 16v @ c36 seems like it might of leaked so gonna replace that now will update again asap
UPDATE 2
FIXED!!
rca is working ive got fz-1's spinning at me in space wohoooo
now im gonna have to test cd drive and get myself a controller lol
hope this helps someone!
- T2KFreeker
- 3DO ZERO USER
- Posts: 1241
- Joined: Wed Feb 07, 2007 6:41 am
- Location: Parts Unknown
Re: panasonic 3do fz-1 power but no video output :( FIXED!!
Hmm, this is great information to have. The Caps are finally starting to go bad in the 3DO units. I wonder how many 3DO systems are out there with bad/leaky caps these days that people just threw out. Very sad when you think about it. Glad you got it fixed and hopefully it works for another 20 years!
This is a stick up! Put all of your 3DO games in the bag and nobody gets hurt!
Re: panasonic 3do fz-1 power but no video output :( FIXED!!
Can you post pics of what you fixed and where?retrotech wrote:Hi everyone
ive been given a fz-1 which powers up and ejects cd tray etc but i can't get any video output.
i've tried multiple cables on all sockets (s-video,rca and rf) with no avail
the board is very very clean so but im thinking a cap or two have failed (although they all look in very good condition)ive got the 6800 uf one and will replace it today.
i've only found two references to it through google, one of which is a post on this forum...
http://www.3do.cdinteractive.co.uk/view ... f=2&t=3032 which ive replied to and am no further on so i thought id start a new thread.
Has anyone had this problem? any feedback would be greatly appreciated!
ill edit later on when i've replaced the 6800 uf and the bios battery (not sure if a 3do will boot without the 3v battery).
thanks in advance
mike
UPDATE
after replacing the 6800uf cap i got video (the 3do logo) for about 10 seconds... yay! then it went again
on closer inspection it seems the 10uf 16v @ c36 seems like it might of leaked so gonna replace that now will update again asap
UPDATE 2
FIXED!!
rca is working ive got fz-1's spinning at me in space wohoooo
now im gonna have to test cd drive and get myself a controller lol
hope this helps someone!
What came after the Jaguar was the PS1 which for all it's greatness, ushered in corporate development and with it the bleached, repetitive, bland titles which for the most part we're still playing today. - David Wightman
Re: panasonic 3do fz-1 power but no video output :( FIXED!!
just glad i saved this one
and yeah ill get a few pics tonight and upload them
and yeah ill get a few pics tonight and upload them
Re: panasonic 3do fz-1 power but no video output :( FIXED!!
attached a picture to this post
- Attachments
-
- Panasonic-3DO-007-Motherboard fixed.jpg (172.44 KiB) Viewed 21917 times
- Martin III
- 3DO ZERO USER
- Posts: 1005
- Joined: Fri Feb 11, 2011 12:32 am
- Location: United States of America
Re: panasonic 3do fz-1 power but no video output :( FIXED!!
Nice work. [wishes we had a thumbs up smilie]
Re: panasonic 3do fz-1 power but no video output :( FIXED!!
Thanks for posting this. I picked up a FZ-1 off of Ebay for $20, marked as "broken/dead".
Swapped out all three caps (unsure if I needed to do all three) but it's alive and working great now!
Swapped out all three caps (unsure if I needed to do all three) but it's alive and working great now!
Re: panasonic 3do fz-1 power but no video output :( FIXED!!
Good news all around.
Most wanted - Eye of Typhoon, 3DO Magazines issues #14 & #15, Pro Stadium, Defcon 5