Homebrew and Mods (For Software & Hardware)
-
Versus
Post
by Versus » Fri Apr 13, 2012 8:44 am
JohnnyDude wrote:I'm trying to figure out how much it would cost me.
I have two FZ-1's. I would just need to pay for the controller as well as a hard drive. I would also need to do some soldering?
1) As I know, this adapter is for FZ-10.
2) Yes, you must solder few wires. It is simple. Detailed instruction attached.
3) You must buy a notebook type IDE HDD, IDE adapter and also pay for shipment in your country.
-
Versus
Post
by Versus » Tue May 08, 2012 9:00 pm
I've recieved this adapter! All I need now is hdd.
-
3DOKid
- 3DO ZONE ADMIN
- Posts: 4683
- Joined: Sat Jan 13, 2007 4:21 pm
- Location: Cambridgeshire, UK
-
Contact:
Post
by 3DOKid » Tue May 08, 2012 11:39 pm
The world is demanding some pictures
-
Versus
Post
by Versus » Wed May 09, 2012 10:40 pm
Last edited by Versus on Sun Sep 02, 2012 5:45 pm, edited 2 times in total.
-
Austin
- Master Poster & Pricing Expert
- Posts: 1839
- Joined: Sun Dec 20, 2009 11:30 am
- Location: Fairfax, VA
-
Contact:
Post
by Austin » Wed May 09, 2012 10:47 pm
How simple, exactly?
-
Versus
Post
by Versus » Wed May 09, 2012 11:49 pm
Mnemo didn't gave the permission to share the instruction. I can only say that you must solder all 16 wires to different parts of mainboard, solder red/black wires from adapter to mainboard as power supply. Also you'll need an HDD.
-
Austin
- Master Poster & Pricing Expert
- Posts: 1839
- Joined: Sun Dec 20, 2009 11:30 am
- Location: Fairfax, VA
-
Contact:
Post
by Austin » Thu May 10, 2012 2:58 am
Hmm. I'm just wondering because I have little solder experience. I don't want to shell out $100+ for something that I might end up destroying in the end.
-
Versus
Post
by Versus » Thu May 10, 2012 7:19 am
I have a little solder experience too. But I think it would be quite simple. Just some accuracy and time. Of cource you'll need a small soldering unit.
Note that you'll need an external power source in case of using regular HDD/CD DVD drive.
PS. If you are afraid to solder you can give this work to an other person.
-
3DOKid
- 3DO ZONE ADMIN
- Posts: 4683
- Joined: Sat Jan 13, 2007 4:21 pm
- Location: Cambridgeshire, UK
-
Contact:
Post
by 3DOKid » Thu May 10, 2012 2:02 pm
NIce pictures, thank you very much.
There are some good guides to soldering on youtube.
1. I think it's a neat skill to have.
2. WIth practice, i don't think it's too much of a challenge. There is just a knack to it.
3DO Experience posted some vids a while back which inspired me
-
Lemmi
- 3DO ZERO USER
- Posts: 1189
- Joined: Sat Jan 13, 2007 11:10 pm
- Location: Mich
Post
by Lemmi » Thu May 10, 2012 10:27 pm
and if your Soldering Iron looks like this get a new one fast
ive had this one since the 1980s and the tip moves back and forth (thats not good)
my grandfather had 2 Irons that looked like these from the 50's and 60's but the tips broke on both and i used them when they were broke before i got the other one above
Ex-3DO collector extraordinaire , but i still have my collection
Villagephotos is dead, need to find my old pics and find another host
-
jasonbar
- 3DO ZERO USER
- Posts: 47
- Joined: Wed Jul 14, 2010 9:17 pm
- Location: Pasadena, CA
-
Contact:
Post
by jasonbar » Sat May 26, 2012 1:36 am
Sorry, I'm arriving at this game a little late.
I would very much like to purchase one of these. Is there still a group purchase brewing? Please advise & please count me in on anything gelling!
Thanks,
-Jason
-
3DO Experience
- 3DO ZONE ADMIN
- Posts: 3686
- Joined: Sun Jun 24, 2007 8:47 am
- Location: U.S.A.
Post
by 3DO Experience » Sat May 26, 2012 3:38 am
Up to three, possibly four.
"Wait. You don't have a bag of charcoal in your gaming room???"
-
Anonymous
Post
by Anonymous » Sat May 26, 2012 8:55 am
I would be interested depending on total price with shipping to Sweden, and when payment has to be done.
-
GuruMeditation
Post
by GuruMeditation » Sat May 26, 2012 10:59 am
Count me in too.
-
Dreygor
- 3DO ZERO USER
- Posts: 110
- Joined: Wed May 23, 2012 2:28 am
- Location: Savannah, GA USA
-
Contact:
Post
by Dreygor » Sat May 26, 2012 1:03 pm
-How is one of these things in USD? Shipping?
-I Was looking on the russian forums and saw someone suggested a SATA to IDE converter. Is this a valid option?
-I'm guessing the power can be soldered off of points in the FZ-10? Or how is power ran for the HDD?
-
3DO Experience
- 3DO ZONE ADMIN
- Posts: 3686
- Joined: Sun Jun 24, 2007 8:47 am
- Location: U.S.A.
Post
by 3DO Experience » Sat May 26, 2012 7:14 pm
Good questions from Dreygor *looks to Versus for answers*, Oh and I love your icon BTW.
So that's four of us in:
3DO Experience
Hound
jasonbar
GuruMeditation
Two maybes:
JohnnyDude
grimm
Hey Austin, you still wanting one?
"Wait. You don't have a bag of charcoal in your gaming room???"
-
3DOKid
- 3DO ZONE ADMIN
- Posts: 4683
- Joined: Sat Jan 13, 2007 4:21 pm
- Location: Cambridgeshire, UK
-
Contact:
Post
by 3DOKid » Sat May 26, 2012 8:12 pm
3DO Experience wrote:Good questions from Dreygor *looks to Versus for answers*, Oh and I love your icon BTW.
So that's four of us in:
3DO Experience
Hound
jasonbar
GuruMeditation
Two maybes:
JohnnyDude
grimm
Hey Austin, you still wanting one?
Count me in too.
-
Dreygor
- 3DO ZERO USER
- Posts: 110
- Joined: Wed May 23, 2012 2:28 am
- Location: Savannah, GA USA
-
Contact:
Post
by Dreygor » Sat May 26, 2012 9:03 pm
Thanks, im a huge WH40K fan
I'm a maybe also based on two things.
-Cost of the HDD board
-And if I can get my hands on a fz-10 that just needs a new cd-rom or one for cheap, since this seems like a good replacement for that. I personally own a Goldstar 3DO and I'm not sure this would work with it. Let alone I don't want to mod a good unit.
I only have about 200ish images so I don't need that large of a hard drive. However the reason im interested in using the SATA drive adapter is I have quite a few SATA HDs laying around. I even have a 128gb SD SATA that would almost be perfect for this.
I just want to weigh and review my options before I commit.
-
Austin
- Master Poster & Pricing Expert
- Posts: 1839
- Joined: Sun Dec 20, 2009 11:30 am
- Location: Fairfax, VA
-
Contact:
Post
by Austin » Sat May 26, 2012 9:23 pm
I definitely want one but I cannot afford it right now. I could probably spring for it in a month or so. Wouldn't want to be holding anyone back though.
-
Versus
Post
by Versus » Sat May 26, 2012 9:33 pm
-How is one of these things in USD? Shipping?
-I Was looking on the russian forums and saw someone suggested a SATA to IDE converter. Is this a valid option?
-I'm guessing the power can be soldered off of points in the FZ-10? Or how is power ran for the HDD?
-This costs about 120$ plus shipping to your country. This questions better ask Mnemo.
-SATA converter is not tested yet.
-If we are using a notebook type HDD, we can connect it to FZ-10 (+5V). Also this can be possible if we have IDE adapter for regular CD/DVD HDD. In that case we need to buy this simple adapter.
http://www.brownbear.ru/goods/1863.html
-
3DO Experience
- 3DO ZONE ADMIN
- Posts: 3686
- Joined: Sun Jun 24, 2007 8:47 am
- Location: U.S.A.
Post
by 3DO Experience » Sat May 26, 2012 10:56 pm
Austin, I really don't think you'd be holding anyone back with a month. Counting you we still have four more people to go and it might take longer to get 4 to sign on.
Now that's six of us in:
3DO Experience
Hound
jasonbar
GuruMeditation
3DOKid
Austin
Still two maybes:
JohnnyDude
grimm
"Wait. You don't have a bag of charcoal in your gaming room???"
-
Dreygor
- 3DO ZERO USER
- Posts: 110
- Joined: Wed May 23, 2012 2:28 am
- Location: Savannah, GA USA
-
Contact:
Post
by Dreygor » Sat May 26, 2012 11:57 pm
$120 aint bad for a project like this. Let my track down a semi broke or cheap FZ-10 to mod and I will let you know.
This is better than my idea or taking a Rasberry Pi
http://www.raspberrypi.org/ and trying to make FourDO work in linux and gutting a FZ-1 console to work as a PC case. i even thought of using a Nvidia ion micro motherboard in a FZ-1 case
http://www.tigerdirect.com/applications ... CatId=7177 . I know sacralige but there are quite a few non working units out there im sure ... FYI if someone is looking to get of a FZ-1 (or FZ-10) unit with a cd-rom that doesnt work give me a pm. I have lots of ideas.
-
Hound
- 3DO ZERO USER
- Posts: 78
- Joined: Tue Jul 17, 2007 7:44 am
- Location: Fort Lauderdale
Post
by Hound » Sun May 27, 2012 12:19 am
This is looking more promising as time moves on, good, good.
-
Dreygor
- 3DO ZERO USER
- Posts: 110
- Joined: Wed May 23, 2012 2:28 am
- Location: Savannah, GA USA
-
Contact:
Post
by Dreygor » Mon Jun 11, 2012 4:08 am
Hey Versus, was anyone able to test this with a SATA HDD yet?
-
Versus
Post
by Versus » Wed Jun 13, 2012 9:50 am
No, but when I'll connect my adapter, I'll test it.
-
jasonbar
- 3DO ZERO USER
- Posts: 47
- Joined: Wed Jul 14, 2010 9:17 pm
- Location: Pasadena, CA
-
Contact:
Post
by jasonbar » Sat Jun 16, 2012 11:39 pm
$120 is fair. I'm still heartily in!
Thanks,
-Jason
-
Qcombus
- 3DO ZERO USER
- Posts: 49
- Joined: Wed Dec 10, 2008 11:51 pm
Post
by Qcombus » Mon Jun 18, 2012 10:26 pm
If I'm not too late and this is still going I'm in!
-
mabby
- 3DO ZERO USER
- Posts: 11
- Joined: Sat Jun 23, 2012 8:06 pm
Post
by mabby » Sun Jun 24, 2012 11:30 am
New to forum but I was aware of ide adapter when it was only a cd replacement - How do I get hold of one of these devices
-
Trev
- 3DO ZONE MOD
- Posts: 4036
- Joined: Thu Jan 25, 2007 7:19 pm
- Location: States
-
Contact:
Post
by Trev » Sun Jun 24, 2012 4:17 pm
mabby wrote:New to forum but I was aware of ide adapter when it was only a cd replacement - How do I get hold of one of these devices
Hello & welcome to the forum.
Would try to help, but not exactly sure what part of this topic you want clarification on, as the info you need has already been posted in this thread ...
Most wanted - Eye of Typhoon, 3DO Magazines issues #14 & #15, Pro Stadium, Defcon 5
-
3DO Experience
- 3DO ZONE ADMIN
- Posts: 3686
- Joined: Sun Jun 24, 2007 8:47 am
- Location: U.S.A.
Post
by 3DO Experience » Sun Jun 24, 2012 6:17 pm
Now that's seven of us in:
3DO Experience
Hound
jasonbar
GuruMeditation
3DOKid
Austin
Qcombus
Still two maybes:
JohnnyDude
grimm
We need ten to make an order!
"Wait. You don't have a bag of charcoal in your gaming room???"