Another FZ-10 problem. Help?

Faithless · Post by **Faithless** » Wed Sep 03, 2008 1:56 pm

Hi, guys.You are my only hope. =(

I have just brought a 3DO FZ-10 model with Gex. I was thinking if I can make it work again.

Here is the probblem.

It stays on the 3DO logo and them, a message appears on the screen:

***** system error, data abort in supervisor mode.
Where ***** is some word i can´t read because of the tv screen.Its on the upper left side on the screen.

Once, I managed to make Gex boot for a short time (2 secs) and then, it seens like the console reboot back to the 3do logo.

In short.
Doesn't enter the bios/keeps rebooting.Discs seems to work.

Sorry for my really bad english. Any help is apreciated.
thanks.

bonefish · Post by **bonefish** » Fri Sep 05, 2008 2:53 am

sounds like you have a good parts mule!

Faithless · Post by **Faithless** » Fri Sep 05, 2008 4:09 pm

Once, I think I could rewrite de bios memory and maybe get it working again. Looks like I'll have "good parts mule" anyway.

Well, any idea is apreciated. Even spell corrections on my posts is apreciated.