possibly broken 3do?

lilmul123 · Post by **lilmul123** » Mon Jul 30, 2007 10:45 pm

I just bought a FZ-10 from a local market, and it was working fine except for the fact that saved games wouldnt stay on the memory. I figured the battery was dead inside and sure enough, it's dead. So i pried it off, but broke one of the little resistor things next to the battery contacts and the CD switch (very miniscule). I freaked out, but everything was working fine yesterday even with the battery torn off. I even played a game. So today I bought a new battery for it, but now the CD-rom drive doesn't work. I can get to the "insert CD BIOS" but it won't load any game. Right now, I'm figuring there's something wrong with the switch. When I turn on the console, the laser reseats itself in-front of the spinner thing, but just sits there. When I press down on the cd drive switch, nothing happens; it just stays on the "insert CD" screen. That gives me the notion that the drive motors or anything aren't at fault, the switch is just broke.

Have any of you ever encountered this and is there any possible fix? I really don't want to find out I blew 50 bucks for a large paperweight.

bonefish · Post by **bonefish** » Mon Jul 30, 2007 11:11 pm

I haven't dug into my 3do much but I wonder if you short the switch in question, the cd drive would work? Maybe something came loose after reassembly?

lilmul123 · Post by **lilmul123** » Mon Jul 30, 2007 11:16 pm

How could I go about doing that? do i put a wire between those two connections under the switch? Or maybe a dab of solder?

And no wire is loose btw. Every single connection is pretty tight.

Post by **Devin** » Mon Jul 30, 2007 11:29 pm

lilmul123 wrote:I really don't want to find out I blew 50 bucks for a large paperweight.

Too late, you already bought a 3DO!

/Devin runs for cover

bonefish · Post by **bonefish** » Tue Jul 31, 2007 1:16 am

How many wires go to the switch? I would try different combinations to ground/black. If it's dead then it's dead I figure.

lilmul123 · Post by **lilmul123** » Tue Jul 31, 2007 2:38 am

Two I suppose. They aren't wires, the switch is directly soldered to the board.

I suppose I'll figure out how to pry the switch off and figure something out from there. There's gotta be someway to make it think there's always a CD in there.

lilmul123 · Post by **lilmul123** » Tue Jul 31, 2007 2:55 am

alright, i pried the switch off. from what i can see, there is one lead, and a ground. The lead, coincidentally enough, goes from that minuscule transistor to that lead. Since it worked yesterday, I'm supposing that there was enough metal to that transistor to make a circuit, but now there isn't. So what I what I'm considering doing is taking the tiny transistor and soldering it on there, and then soldering the lead from the switch directly to the ground. The bad side to this is that I can't take out a game while it's running..but that's not really a big deal.

bonefish · Post by **bonefish** » Tue Jul 31, 2007 3:09 am

Sounds like a plan, tell us how you make out!

lilmul123 · Post by **lilmul123** » Tue Jul 31, 2007 3:27 am

Success! My theory was correct. The transistor that was leading to the switch wasn't making sufficient contact to the board leads and so the switch didn't work. I soldered it back on, and then shorted the leads for my now torn-off switch, and the disc spins up and is read!

Now the only problem is is that since i broke the switch off, i have to permanently solder those two leads together. Whenever the 3do is on, the disc will be spinning always. I guess that's better than having a 3do that doesn't work at all.

Thanks for the help!

PS: Expect to see more of me on these forums. I absolutely adore my new 3do and was pretty shaken up when i found out it was "broken." You all seem like a nice group of guys so I'm gonna stick around for a bit

Post by **3DOKid** » Tue Jul 31, 2007 8:02 am

Devin wrote:
lilmul123 wrote:I really don't want to find out I blew 50 bucks for a large paperweight.
Too late, you already bought a 3DO!

/Devin runs for cover

Ban request

CrimsonGlory · Post by **CrimsonGlory** » Tue Jul 31, 2007 12:07 pm

Devin wrote:
lilmul123 wrote:I really don't want to find out I blew 50 bucks for a large paperweight.
Too late, you already bought a 3DO!

/Devin runs for cover

Dont you sully this rose tinted forum with your facts and logic.

Post by **3DOKid** » Tue Jul 31, 2007 3:58 pm

double ban request

Post by **Devin** » Tue Jul 31, 2007 5:38 pm

3DOKid wrote:double ban request

Seems to be an error in the forums code, can't seem to BAN 'Admins'!

CrimsonGlory · Post by **CrimsonGlory** » Tue Jul 31, 2007 5:58 pm

Devin wrote:
3DOKid wrote:double ban request
Seems to be an error in the forums code, can't seem to BAN 'Admins'!

and I cant be banned, im the forums cute and loveable rapscallion

Post by **3DOKid** » Tue Jul 31, 2007 9:14 pm

Curses. [punches hand in anger]

Rapscallions, scallywags and scoundrils are immunded to ban requests. Damn - blast - and bother.

I shall use the mighty power of 3DO Kid to thwat thee oh neigh sayer.

Mark. My. Words.

I can not be beaten.

3DO Kid, hero of the true 3DO fanboys.

Post by **3DO Experience** » Tue Jul 31, 2007 10:41 pm

3DOKid wrote:Curses. [punches hand in anger]

Rapscallions, scallywags and scoundrils are immunded to ban requests. Damn - blast - and bother.

I shall use the mighty power of 3DO Kid to thwat thee oh neigh sayer.

Mark. My. Words.

I can not be beaten.

3DO Kid, hero of the true 3DO fanboys.

ROFL

3DO ZONE Forums

possibly broken 3do?

possibly broken 3do?

Re: possibly broken 3do?

Re: possibly broken 3do?

Re: possibly broken 3do?