3DO FZ-1 with/without cooling fan?
Moderators: 3DO Experience, Devin, Bas, 3DOKid
3DO FZ-1 with/without cooling fan?
I bought an NTSC FZ-1 model last month, and it doesn't have the cooling fan. My other FZ-1 has it, and my older FZ1, too. Is there a model that has no cooling fan, or my're really missing / been modified? Because I have played with him for a few hours and everything looks normal, it does not heat up at all.
3DO Brazil website (in portuguese): http://www.3dobrasil.com.br
-
- 3DO ZERO USER
- Posts: 97
- Joined: Fri Jun 28, 2013 10:26 pm
Re: 3DO FZ-1 with/without cooling fan?
I have a Japanese one that has no fan and it does get quite hot but everything works well. Never seen one with a fan. In terms of cost cutting you would have expected later ones not to have it if wasn't actually necessary. There is a thread somewhere on the forum about how there are actually variants of the fz1.
One has a more noticeable marbled effect on top of machine and is also different sized lettering used for the text on the face of the machine. Perhaps someone can confirm if earlier or later ones had fans.
One has a more noticeable marbled effect on top of machine and is also different sized lettering used for the text on the face of the machine. Perhaps someone can confirm if earlier or later ones had fans.
Re: 3DO FZ-1 with/without cooling fan?
I think the fan is a bit of a failure anyway, it doesn't seem like it pushes much warm air out of the system if you put your hand by the vents.
Re: 3DO FZ-1 with/without cooling fan?
Thanks Retrofanatic, I've found the thread http://www.3do.cdinteractive.co.uk/viewtopic.php?t=222.
I have both models, the earlier and the later one, interesting enough, the mine that doesn't have the cooler fan is the earlier model (in the thread, they both have).
I have both models, the earlier and the later one, interesting enough, the mine that doesn't have the cooler fan is the earlier model (in the thread, they both have).
3DO Brazil website (in portuguese): http://www.3dobrasil.com.br