3DO ZONE Forums

Posted: **Thu Mar 22, 2007 9:17 am**

The pin outs look the same... Will it blow my controller port on my genny if I try it out?

Posted: **Thu Mar 22, 2007 6:46 pm**

They're the same connectors, but that's about it. It won't hurt to plug it in, but it probably won't work, either.

Posted: **Fri Mar 23, 2007 3:56 pm**

Atari 2600 controllers work on the genesis

Posted: **Fri Mar 23, 2007 4:57 pm**

Just off the cuff, is the jaguar pro 6 button controller more ergonomic than the original 3 button? I wonder if the Jag controllers work with the Genny.

Posted: **Fri Mar 23, 2007 9:41 pm**

bonefish wrote:Atari 2600 controllers work on the genesis

I'm very happy to report Genesis controllers work on the Amiga as well! Excellent for a blast on Uridium 2

Posted: **Tue Mar 27, 2007 11:20 pm**

I haven't had a chance to look into the specifics of the control pads on 3DO vs. Genesis, but from what I do know they will not work interchangeably on the two machines.

Additionally, you run the risk of damaging the 3DO if you try to use Genesis pads on it.
The reason is that the 3DO uses a serial bus for communication between 3DO peripherals and therefore 3DO peripherals are active devices. Genesis pads are simple switch boxes that when hooked up to a 3DO run the risk of directly shorting the power supply lines running from the 3DO peripheral port.
While the physical layout of the pins is similar between the Genesis and 3DO, the signaling standards are completely different.

3DO ZONE Forums

Can you use 3do controllers with the Sega Genesis?

Can you use 3do controllers with the Sega Genesis?