WHo has them technical docs?
Moderators: 3DO Experience, Devin, Bas, 3DOKid
- 3DOKid
- 3DO ZONE ADMIN
- Posts: 4683
- Joined: Sat Jan 13, 2007 4:21 pm
- Location: Cambridgeshire, UK
- Contact:
WHo has them technical docs?
Who has them technical docs that were on eBay not so long ago?
What's the score?
I've been asked. I dunno. So I'm asking
What's the score?
I've been asked. I dunno. So I'm asking
yepTrev wrote:Good question ... I 2nd this inquiry (wait, didn't bitrate get them ...?)
i would like to see some cool info from the docs, but i dont really have any interest in the whole thing
Ex-3DO collector extraordinaire , but i still have my collection
Villagephotos is dead, need to find my old pics and find another host
Villagephotos is dead, need to find my old pics and find another host
-
- 3DO ZERO USER
- Posts: 109
- Joined: Fri Aug 08, 2008 12:35 pm
- Location: Germany
Well, if you are an electrical engineer like me, they are very interesting
A complete schematic diagram of the FZ-1 with a complete BOM. Signal test points with o-scope prints as well as literature describing the jobs of several of the main IC's.
On a side note, I've been doing some tinkering with the 3DO. Specifically, with the 3DO video output.
We all know that RGB output can be achieved. Unfortunately, as it stands right now the existing solutions for doing so aren't all that stable and/or require the use horizontal frequency doubling hardware such as the XRGB-2.
The reason for this is that the digital RGB signal is available between CLIO and the video encoder and the interpolation from 320X240 to 640X480 is done within the encoder.
Therefore, right now, you can grab the 3-channel digital RGB signal and decode it, but it is only at 320X240 resoution.
I'm working on a scalable interpolating DAC based solution that will allow the 3DO to output a true RGB signal at a multitiude of resolutions at proper horizontal frequencies. Things get a little tricky with the video timing signals, but it's nothing that a little more time can't overcome.
I'll keep ya guys posted.
A complete schematic diagram of the FZ-1 with a complete BOM. Signal test points with o-scope prints as well as literature describing the jobs of several of the main IC's.
On a side note, I've been doing some tinkering with the 3DO. Specifically, with the 3DO video output.
We all know that RGB output can be achieved. Unfortunately, as it stands right now the existing solutions for doing so aren't all that stable and/or require the use horizontal frequency doubling hardware such as the XRGB-2.
The reason for this is that the digital RGB signal is available between CLIO and the video encoder and the interpolation from 320X240 to 640X480 is done within the encoder.
Therefore, right now, you can grab the 3-channel digital RGB signal and decode it, but it is only at 320X240 resoution.
I'm working on a scalable interpolating DAC based solution that will allow the 3DO to output a true RGB signal at a multitiude of resolutions at proper horizontal frequencies. Things get a little tricky with the video timing signals, but it's nothing that a little more time can't overcome.
I'll keep ya guys posted.
Cooooooooool! RGB output if stable would rock
Now all you need to do is make it go to 11
Now all you need to do is make it go to 11
"purge with fire Bretheren"
3DO is dead , long live 3DO
http://www.youtube.com/watch?v=_K2kuP_anAc
"The greatest games in the world take seconds to learn but months to master. The worst take months to learn and minutes to finish."...MattyG
3DO is dead , long live 3DO
http://www.youtube.com/watch?v=_K2kuP_anAc
"The greatest games in the world take seconds to learn but months to master. The worst take months to learn and minutes to finish."...MattyG
- 3DO Experience
- 3DO ZONE ADMIN
- Posts: 3686
- Joined: Sun Jun 24, 2007 8:47 am
- Location: U.S.A.
I have done the rgb mod seemed stable to me.
if the xrgb syncs on it anything should.
Once you have rgb you can go to component with no problem.
I have a rgb scart to component convert at home lent to me for a rgb nes mod i am doing, ill test it out and by pass the xrgb2.
I thought the other person i did the mod for used both a rgb displays and a xrgb 2 with no problem.
The guy that made the freedo 3do emulator had the data sheet for the video encoder. When i needed it to help me with the rgb mod he would not release the info saying he could get in legal trouble.............
3do rgb dac
http://dempa.jp/rgb/graveyard/3do.html
if the xrgb syncs on it anything should.
Once you have rgb you can go to component with no problem.
I have a rgb scart to component convert at home lent to me for a rgb nes mod i am doing, ill test it out and by pass the xrgb2.
I thought the other person i did the mod for used both a rgb displays and a xrgb 2 with no problem.
The guy that made the freedo 3do emulator had the data sheet for the video encoder. When i needed it to help me with the rgb mod he would not release the info saying he could get in legal trouble.............
3do rgb dac
http://dempa.jp/rgb/graveyard/3do.html