I own a 3do dev. station that I bought off of ebay. I bought it so I could play unencripted 3do discs. I have sense found out, that it won't do anything unless it is hooked up to a computer. It will boot up, and read a disc, but then it won't accept it, and start the enter disc screen again. Anyway to get it to play 3do discs at all? This is the dev. station, not the 3do test station.
Thanks guys
3do dev system
Moderators: 3DO Experience, Devin, Bas, 3DOKid
-
- 3DO ZERO USER
- Posts: 109
- Joined: Fri Aug 08, 2008 12:35 pm
- Location: Germany
Re: 3do dev
I think everything you need to know is in the sdks texts!gmaster wrote:What is in the development kit, and what kind of hardware is needed to connect the developer system to the mac?
Thanks
If i remember correctly you need an old quadra mac.
-
- 3DO ZERO USER
- Posts: 109
- Joined: Fri Aug 08, 2008 12:35 pm
- Location: Germany
Re: 3do dev
The connection between the dev station and the Mac is done with a special NuBus card, which uses an optical cable (!). I've never seen or found one myself, sadly. I'm afraid those are very hard to find.gmaster wrote:What is in the development kit, and what kind of hardware is needed to connect the developer system to the mac?
Thanks